How to Fix, Level and Clean Cracked Bathroom Tiles. (A step-by-step Process)

Cracked bathroom tiles can be an eyesore and may lead to further damage if not addressed promptly. Fortunately, repairing them is a manageable DIY task that can save you time and money. In this step-by-step guide, we’ll walk you through the process of fixing cracked bathroom tiles to restore the aesthetics and functionality of your space.

What are the Materials Needed

Replacement tiles


Tile adhesive.

Chisel or putty knife.



Tile saw or tile cutter.

Masking tape

Rubber gloves

Grout float.

Grout sealer.

Cleaning solution

The Process of Fixing the Cracked Tiles

Step 1: Assess the Damage

Carefully examine the cracked tile and the surrounding area. Determine the extent of the damage and whether the crack is isolated or part of a larger issue. If the crack is due to underlying structural problems, consider addressing those issues before proceeding with the tile repair.

Step 2: Gather Materials

Collect all the necessary materials mentioned above before starting the repair process. Make sure you have the right replacement tiles that match the existing ones in colour, size, and texture.

Step 3: Remove the Grout

Use a chisel or putty knife to carefully remove the grout around the cracked tile. Take your time to avoid damaging neighboring tiles. Be gentle but firm, and clear the grout around all four sides of the damaged tile.

Step 4: Remove the Cracked Tile

Once the grout is removed, use a hammer and chisel to carefully break and remove the cracked tile. Be cautious not to damage the adjacent tiles during this process.

Step 5: Clean the Substrate

After removing the cracked tile, clean the substrate (the surface under the tile) to ensure proper adhesion for the new tile. Remove any remaining adhesive or debris using a chisel or putty knife.

Step 6: Apply Tile Adhesive

Using a notched trowel, apply a thin layer of tile adhesive to the cleaned substrate. Ensure an even and consistent coverage to promote strong adhesion.

Step 7: Install the Replacement Tile

Carefully place the replacement tile into the adhesive, aligning it with the surrounding tiles. Press it firmly into place to ensure good contact with the adhesive.

Step 8: Allow Adhesive to Cure

Allow the tile adhesive to cure according to the manufacturer’s instructions. This typically takes 24-48 hours. Avoid putting any weight or stress on the repaired tile during this time.

Step 9: Grout the Tile

Once the adhesive has cured, mix the grout according to the manufacturer’s instructions. Use a grout float to apply the grout, filling the spaces between the tiles. Wipe off excess grout with a damp sponge.

Step 10: Seal the Grout

After the grout has dried, apply a grout sealer to protect it from moisture and stains. Follow the manufacturer’s recommendations for application and drying times.

By following these step-by-step instructions, you can restore the beauty of your bathroom and prevent further damage. Remember to take your time and be careful throughout the process to achieve the best results.

How to Level Newly Fixed Tiles

After successfully fixing cracked bathroom tiles, it’s crucial to ensure that the newly installed tile is level and flush with the surrounding tiles. An uneven surface not only affects the visual appeal but can also lead to functional issues over time. In this section, we’ll guide you through the process of leveling newly fixed tiles to achieve a professional finish.

Step 1: Check for Levelness

Before proceeding with leveling, assess the alignment of the newly fixed tile with the surrounding ones. Place a straightedge or level across the tiles to identify any high or low spots. If there are noticeable variations, leveling is necessary to create a seamless and visually pleasing surface.

Step 2: Prepare a Self-Leveling Compound

Self-leveling compounds are an excellent solution for achieving a smooth and level surface. These compounds are easy to use and provide a quick solution for minor leveling issues. Follow the manufacturer’s instructions to prepare the self-leveling compound, ensuring the correct water-to-powder ratio.

Step 3: Apply the Self-Leveling Compound

Pour the prepared self-leveling compound onto the tiled surface, focusing on the areas with unevenness. Use a trowel or a large putty knife to spread the compound evenly across the tiles. Work quickly, as self-leveling compounds have a limited working time.

Step 4: Spread and Smooth

As the self-leveling compound is applied, it will naturally seek a level surface. Use a smoothing tool, such as a smoothing trowel or a notched spreader, to help distribute the compound and achieve an even surface. Pay attention to the edges to prevent any abrupt transitions.

Step 5: Allow the Compound to Set

Give the self-leveling compound sufficient time to set and cure. This typically takes a few hours, but it’s crucial to follow the manufacturer’s recommended drying time. Avoid walking on the surface during this period to prevent any disturbances.

Step 6: Sanding (if necessary)

In some cases, the self-leveling compound may leave a slightly rough surface. Once the compound has cured, use fine-grit sandpaper to smooth out any imperfections. This step ensures a flawless finish and prepares the surface for the final touches.

Step 7: Check for Levelness Again

After the self-leveling compound has fully cured and any sanding is complete, recheck the levelness of the tiled surface. Place the straightedge or level across the tiles to confirm that the entire area is now level and flush. Address any remaining uneven spots if necessary.

Step 8: Clean the Surface

Before applying any final finishes, ensure the leveled surface is clean and free of dust or debris. Wipe the tiles with a damp sponge or cloth to create an ideal surface for the next steps.

Step 9: Apply Sealant or Grout

Once you’re satisfied with the levelness of the newly fixed tiles, proceed with sealing the grout or applying any additional finishes. Follow the recommended guidelines for the specific product you’re using.

Leveling newly fixed tiles is a crucial step in achieving a professional and visually appealing result. By following these steps and using self-leveling compounds, you can ensure that your bathroom tiles not only look great but also provide a durable and functional surface for years to come. Remember to be patient and meticulous throughout the process to achieve the best results.

How to Clean Newly Fixed Tiles

Once you’ve successfully leveled and fixed cracked bathroom tiles, maintaining their cleanliness is essential for preserving their appearance and longevity. In this section, we’ll guide you through the process of cleaning newly fixed tiles to ensure they stay spotless and looking brand new.

Step 1: Allow Adequate Curing Time

Before initiating the cleaning process, it’s crucial to allow the newly fixed tiles to cure completely. This is especially important if you’ve used adhesives, grout, or leveling compounds. Refer to the product instructions for recommended curing times to avoid compromising the integrity of the materials.

Step 2: Sweep or Vacuum

Begin the cleaning process by removing any loose dirt, dust, or debris from the tiled surface. Use a soft broom or a vacuum cleaner with a brush attachment to prevent scratching the tiles. Pay attention to corners and edges where debris may accumulate.

Step 3: Dampen the Tiles

Dampen the tiles with clean water using a sponge or a mop. This helps to loosen any surface dirt and prepares the tiles for a more thorough cleaning. Avoid using excessive water to prevent water infiltration into the grout lines.

Step 4: Choose the Right Cleaning Solution

Select a mild and suitable tile cleaner based on the type of tiles you have installed. Different tiles may require specific cleaning solutions, so it’s essential to follow the manufacturer’s recommendations. Avoid harsh chemicals that can damage the tiles or grout.

Step 5: Apply the Cleaning Solution

Spray or apply the chosen cleaning solution onto the tiles. Allow it to sit for a few minutes to break down any stubborn stains or grime. Use a soft-bristled brush or a non-abrasive sponge to scrub the tiles gently. Pay attention to grout lines and areas with visible dirt.

Step 6: Rinse Thoroughly

After scrubbing, rinse the tiles thoroughly with clean water to remove any residue from the cleaning solution. Ensure that all traces of the cleaner are completely washed away. Use a clean, damp sponge or mop for this step.

Step 7: Dry the Tiles

Wipe the tiles dry with a clean, dry cloth or towel to prevent water spots and streaks. Adequate drying is essential to maintain the tiles’ shine and prevent the growth of mold or mildew in damp areas.

Step 8: Periodic Maintenance

To keep your newly fixed tiles looking pristine, establish a regular cleaning routine. Periodically sweep or vacuum to remove loose dirt and perform a more thorough cleaning as needed. Avoid using abrasive tools or harsh chemicals to prevent damage to the tiles and grout.

Properly cleaning newly fixed tiles is a crucial step in maintaining their appearance and durability. By following these steps and incorporating regular cleaning into your maintenance routine, you can enjoy a clean and aesthetically pleasing bathroom for years to come. Always be mindful of the specific care requirements for the type of tiles you have installed.

Similar Posts

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.